# changelog

author: Michal Lisowski <michal@exads.com> - 0.0.63-3
changelog:
  - Add systemd unit for the daemon
  - Add user and group
  - Install python scripts to /opt/elastalert to keep it separated
  - Create basic structure in /opt/elastalert


author: - Orion Poplawski <orion@cora.nwra.com> - 3.2.6-4
changelog:
  - Add patch to fix extraneous version path entry properly
  - Use --with-module-path to point to /etc/modulefiles for local modules,
    this also fixes bug #436041


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.7b-7
changelog:
  - Add patch to set a sane default MANPATH
  - Add createmodule.sh utility script for creating modulefiles


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.10-2
changelog:
  - Add patch to comment out stray module use in modules file when not using
    versioning (bug #895555)
  - Add patch to fix module clear command (bug #895551)
  - Add patch from modules list to add completion to avail command


author: Orion Poplawski <orion@cora.nwra.com> - 3.2.10-9
changelog:
  - Use alternatives for /etc/profile.d/modules.{csh,sh}
  - Add /usr/share/modulefiles to MODULEPATH
  - Add rpm macro to define %_modulesdir


author: Orion Poplwski <orion@cora.nwra.com> - 3.2.10-14
changelog:
  - Fix createmodule.sh to handle exported functions (bug #1197321)
  - Handle more prefix/suffix cases in createmodule.{sh,py} (bug #1079341)


author: Xavier Delaruelle <xavier.delaruelle@cea.fr> - 4.0.0-0.1.beta
changelog:
  - Update to 4.0.0-beta
  - Define compat subpackage to provide 3.2 compatiblity version also
    provided in source tarball
  - Add condition statements to either build on Fedora and EL systems


author: Xavier Delaruelle <xavier.delaruelle@cea.fr> - 4.1.0-1
changelog:
  - Update to 4.1.0
  - Enable pagination with less as pager
  - Define LD_LIBRARY_PATH as quarantine variable to protect module execution


author: Xavier Delaruelle <xavier.delaruelle@cea.fr> - 4.1.1-1
changelog:
  - Update to 4.1.1
  - Move hostname requirement to compat subpackage (bug #1545369)
  - Add procps in build requirements as 'ps' is now checked at configure time


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.1.1
changelog:
  - FIXES
  - Fixed an issue to align hp-health status messages.
  - Fixed an issue to stop pagination of IMLs when in script mode.
  - The "hp-snmp-agents"and "hp-health" initialization scripts are enhanced to check for the existence of a support IPMI stack.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant G6 servers. 
  - ASR time-out value can be set from hpasmcli when ASR is enabled. 
  - Updated the installation instructions in hp_mgmgt_install man page. 
  - Removed the script dependency between the hp-health and hp-snmp-agents RPM. To enable just storage agents, customers now in  stall the hp-health and hp-snmp-agents. If the "/etc/init.d/hp-health" file is removed or renamed, the storage agents will   start if configured in the /opt/hp/hp-snmp-agents/cma.conf file. 
  - Init scripts .status. function for hp-snmp-agents & hp-health now differentiates whether an agent exited normally or abnorm  ally. 
  - libcpqci moved to hp-health to simplify dependency handling. and .libcpqci updated to version 2, will now handle hpilo driv  er. 
  - Added Trusted Platform Module (TPM) awareness.

  - FIXES
  - Fixed an issue where   hpasmcli does segmentation fault if we execute the following sequence of commands in hpasmcli on Int  el platforms: show dimm, show temp, show dimm. 
  - Fixed the improper functioning of .repair. option in hpasmcli utility. 
  - Fixed an issue where  hpasmxld/hpasmlited was logging all the messages into syslog with priority .error.. Now it will log e  ach message with its actual priority. 
  - Fixed an issue where IML was not showing new events in hpasmlited + OpenIPMI configuration. 
  - Fixed an issue where the command .service hp-health restart. was showing the twice.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - FIXES
  - Fixed an issue where running multiple instances of .hplog -i' may cause more than 90% CPU utilization. 
  - Fixed an issue where the servers with large amount of memory may ASR during memory initialization. 
  - Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet.


author: HPE Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.5.0
changelog:
  - ENHANCEMENTS

  - FIXES
  - iLO hpasmlited daemon crash after 2 iLO resets loops.
  - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN.
  - Error logs seen in service hp-asrd status.


author: Ver:2.40-13.0
changelog:
  - Please refer to online documentation by searching for the 
  "HP Array Configuration Utility CLI" using the search box on
  http://www.hp.com. Then select the Download software link,
  select your operation system. Under the Enhancements tab is a 
  description of the changes. (Severity: Low)


author: Pawel Krupa <pkrupa@redhat.com> - 0.0.0-3
changelog:
  - Temporary set version statically
  - Fix changelog ordering
  - Comment-out node.d configuration directory


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-4
changelog:
  First draft refactor on package dependencies section
  - Remove freeipmi/nfacct plugin flags. We auto-detect all plugins by decision
  - Start refactor of package dependencies
  - Add missing dependencies, with respect to distro peculiarities
  - Adjust existing dependencies, so that distro-specific package names is applied


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-5
changelog:
  Another pass on cleaning up pre/post installation steps
  - Sync permission and ownership on files and directories


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-7
changelog:
  - Raise the path overrides to the spec file level, not just the configure.
  - Adjust tighter permissions on some folders, based on what we did on our installer
  - Introduce go.d plugin download and install, to include it on the package (Temporarily, to become separate package on next iteration)


author: Jeremy Hinegardner <jeremy at hinegardner dot org> - 0.7.65-1
changelog:
  - Update to new stable 0.7.65
  - change ownership of logdir to root:root
  - add support for ipv6 (bug #561248)
  - add random_index_module
  - add secure_link_module


author: Jeremy Hinegardner <jeremy at hinegardner dot org> - 0.8.53-3
changelog:
  - Change ownership of /var/log/nginx to be 0700 nginx:nginx
  - update init script to use killproc -p
  - add reopen_logs command to init script
  - update init script to use nginx -q option


author: Keiran "Affix" Smith <fedora@affix.me> - 1.0.10-1
changelog:
  - Bugfix: a segmentation fault might occur in a worker process if resolver got a big DNS response. Thanks to Ben Hawkes.
  - Bugfix: in cache key calculation if internal MD5 implementation wasused; the bug had appeared in 1.0.4.
  - Bugfix: the module ngx_http_mp4_module sent incorrect "Content-Length" response header line if the "start" argument was used. Thanks to Piotr Sikora.


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.0.12-2
changelog:
  - update upstream URL
  - replace %define with %global
  - remove obsolete BuildRoot tag, %clean section and %defattr
  - remove various unnecessary commands
  - add systemd service file and update scriptlets
  - add Epoch to accommodate %triggerun as part of systemd migration


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.0.15-1
changelog:
  - update to upstream release 1.0.15
  - no need to apply auto-cc-gcc patch
  - add %global _hardened_build 1


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.0.15-4
changelog:
  - add nginx-upgrade to replace functionality from the nginx initscript
    that was lost after migration to systemd
  - add README.fedora to describe usage of nginx-upgrade
  - nginx.logrotate: use built-in systemd kill command in postrotate script
  - nginx.service: start after syslog.target and network.target
  - nginx.service: remove unnecessary references to config file location
  - nginx.service: use /bin/kill instead of "/usr/sbin/nginx -s" following
    advice from nginx-devel
  - nginx.service: use private /tmp


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.2.4-1
changelog:
  - update to upstream release 1.2.4
  - introduce new systemd-rpm macros (#850228)
  - link to official documentation not the community wiki (#870733)
  - do not run systemctl try-restart after package upgrade to allow the
    administrator to run nginx-upgrade and avoid downtime
  - add nginx man page (#870738)
  - add nginx-upgrade man page and remove README.fedora
  - remove chkconfig from Requires(post/preun)
  - remove initscripts from Requires(preun/postun)
  - remove separate configuration files in "/etc/nginx/conf.d" directory
    and revert to upstream default of a centralized nginx.conf file
    (#803635) (#842738)


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.2.6-2
changelog:
  - send correct kill signal and use correct file permissions when rotating
    log files (#888225)
  - send correct kill signal in nginx-upgrade


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.2.6-5
changelog:
  - uncomment "include /etc/nginx/conf.d/*.conf by default but leave the
    conf.d directory empty (#903065)


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.4.0-1
changelog:
  - update to upstream release 1.4.0
  - enable SPDY module (new in this version)
  - enable http gunzip module (new in this version)
  - enable google perftools module and add gperftools-devel to BR
  - enable debugging (#956845)
  - trim changelog


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.4.1-1
changelog:
  - update to upstream release 1.4.1 (#960605, #960606):
    CVE-2013-2028 stack-based buffer overflow when handling certain chunked
    transfer encoding requests


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.6.1-1
changelog:
  - update to upstream release 1.6.1
  - (#1126891) CVE-2014-3556: SMTP STARTTLS plaintext injection flaw


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.6.2-2
changelog:
  - create nginx-filesystem subpackage (patch from Remi Collet)
  - create /etc/nginx/default.d as a drop-in directory for configuration files
    for the default server block
  - clean up nginx.conf


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.8.0-4
changelog:
  - add TimeoutStopSec=5 and KillMode=mixed to nginx.service
  - set worker_processes to auto
  - add some common options to the http block in nginx.conf
  - run nginx-upgrade on package update
  - remove some redundant scriptlet commands
  - listen on ipv6 for default server (#1217081)


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.8.0-8
changelog:
  - replace /bin/kill with /usr/bin/systemctl kill in logrotate script (#1231543)
  - remove After=syslog.target in nginx.service (#1231543)
  - replace ExecStop with KillSignal=SIGQUIT in nginx.service (#1231543)


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.8.0-14
changelog:
  - consistently use '%global with_foo' style of logic
  - remove PID file before starting nginx (#1268621)


author: Jamie Nguyen <jamielinux@fedoraproject.org> - 1:1.8.1-1
changelog:
  - update to upstream release 1.8.1
  - CVE-2016-0747: Insufficient limits of CNAME resolution in resolver
  - CVE-2016-0746: Use-after-free during CNAME response processing in resolver
  - CVE-2016-0742: Invalid pointer dereference in resolver


author: Robert Duncan <robert@robduncan.co.uk> - 1.9.2-p180-1
changelog:
  - Update prerequisites to include make
  - Update ruby version to 1.9.2-p180
  - Install /usr/share documentation
  - (Hopefully!?) platform agnostic


author: Ian Meyer <ianmmeyer@gmail.com> - 1.9.2-p180-2
changelog:
  - Remove non-existant --sitearchdir and --vedorarchdir from 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches   -m64 -mtune=generic}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches   -m64 -mtune=generic}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches   -m64 -mtune=generic -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    FCFLAGS="${FCFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches   -m64 -mtune=generic -I/usr/lib64/gfortran/modules}" ; export FCFLAGS ; 
    LDFLAGS="${LDFLAGS:--Wl,-z,relro }"; export LDFLAGS; 
    [ "1" == 1 ] && [ "x86_64" == ppc64le ] && /usr/lib/rpm/redhat/libtool-handle-ppc64le.sh ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
        [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /usr/bin/rm -f $i && /usr/bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--program-prefix= \
  	--disable-dependency-tracking \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/var/lib \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info
  - Replace --sitedir --vendordir with simpler --libdir
  - Change /usr/share to /usr/share


author: O.Elliyasa <osman@Cable.EU.org>
changelog:
  - Multi package creation.
    Created core, standalone, inetd (&doc) package creations.
    Added startup script for init.d
    Need to make the "standalone & inetd" packages being created as "noarch"
  - Added URL.
  - Added prefix to make the package relocatable.


author: Daniel Roesen <droesen@entire-systems.com>
changelog:
  - moved Changelog to bottom
  - fixed %pre script /etc/ftpusers generator
  - removed /ftp/ftpusers from package management. Deinstalling ProFTPD
    should _not_ result in removal of this file.


author: Daniel Roesen <droesen@entire-systems.com>
changelog:
  - cleaned up .spec formatting (cosmetics)
  - fixed CFLAGS (fixes /etc/shadow support)
  - included COPYING, CREDITS, ChangeLog and NEWS
  - Renamed main package from "proftpd-core" to just "proftpd"
  - release: 1.2.0-2


author: Daniel Roesen <droesen@entire-systems.com>
changelog:
  - added "Obsoletes: proftpd-core" to make migration to new RPMs easier.
    Thanks to Sébastien Prud'homme <prudhomme@easy-flying.com> for the hint.
  - release: 1.2.0-3


author: Daniel Roesen <droesen@entire-systems.com>
changelog:
  - PAM >= 0.72 is now a requirement. Versions before are broken and
    Red Hat provides a PAM update for all RH 6.x releases. See:
    http://www.redhat.com/support/errata/RHSA-2000-120.html
    Thanks to O.Elliyasa <osman@Cable.EU.org> for the suggestion.
    For details see http://bugs.proftpd.org/show_bug.cgi?id=1048
  - release: 1.2.1-2


author: TJ Saunders <tj@castaglia.org>
changelog:
  - Added use of %defattr to allow build of RPMs by non-root users
    For details see http://bugs.proftpd.org/show_bug.cgi?id=1580


author: John Morrissey <jwm@horde.net>
changelog:
  - Added removal of build leftover directory in %clean.
    Submitted by: Christian Pelealu <kurisu@mweb.co.id>


author: John Morrissey <jwm@horde.net>
changelog:
  - Permit selection of additional contrib modules when building the RPM
    Submitted by: Ivan F. Martinez <ivanfm@users.sourceforge.net>


author: John Morrissey <jwm@horde.net>
changelog:
  - This changelog is not frequently updated - please check the CVS revision
    history at http://cvs.proftpd.org/ instead.


author: Itamar Reis Peixoto <itamar@ispbrasil.com.br>
changelog:
  - Added "--with mod_quotatab" and "--with mod_quotatab_sql" to enable Quota Support while building the RPM


author: Philip Prindeville <philipp_subx@redfish-solutions.com>
changelog:
  - Cleaned up the .spec file to work with more recent releases of RPM.  Moved
    header files into separate component.


author: Paul Howarth <paul@city-fan.org>
changelog:
  - Upstream RPM package refactored to support Red Hat/Fedora based distributions
    from EL-5 onwards:
    - Fix build failure on CentOS 5 (bug 3640)
    - Build all modules that don't require additional dependencies by default
    - Optionally build other modules (use --with everything for all modules)
    - Use PAM-based configuration by default
    - Add systemd support
    - Merge inetd subpackage back into main package
    - Create new utils subpackage
    - Lots of minor fixes


author: Paul Howarth <paul@city-fan.org>
changelog:
  - mod_wrap2 and friends don't need tcp_wrappers, so move them from the wrap
    subpackage to the main package


author: Paul Howarth <paul@city-fan.org>
changelog:
  - Package translations and BR: gettext to make sure we get them
  - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org>
changelog:
  - Include systemd unit files for native inetd operation (bug 3661)
  - Use /run/console rather than /run/lock for systemd detection, because the
    'mock' build tool may create /run/lock itself
  - Fix bogus dates in spec changelog


author: Philip Prindeville <philipp@fedoraproject.org> 2.3.10-5
changelog:
  - Fix for bz#965461
  - Get rid of some of the more worrisome compiler warnings.
  - Use patch instead of sed to modify Makefile.


author: Ver:3.40-3.0
changelog:
  - Please refer to online documentation by searching for the 
  "Smart Storage Administrator Configuration Utility CLI" using
  the search box on http://www.hpe.com. Then select the Download
  software link, select your operation system. Under the Enhancements
  tab is a description of the changes. (Severity: Low)


author: Turadg Aleahmad <turadg@wise.Berkeley.EDU>
changelog:
  - made this new RPM SPEC to work on my system, RHEL 3 b1
  - based off instructions at:
    http://twiki.org/cgi-bin/view/TWiki/TWikiInstallationGuide
  - you may have better luck with one of these:
    http://twiki.org/cgi-bin/view/Codev/TWikiUnixInstaller
    http://twiki.org/cgi-bin/view/Codev/TwikiMakeFile
    http://twiki.org/cgi-bin/view/Codev/TwikiSpecFile
    http://www.google.com/search?q=twiki%2DDec2001%2D1es%2Esrc%2Erpm


author: Kevin Miller <kcmiller@duke.edu>
changelog:
  - Upgrade to Cairo release (20040901)
  - Added Redirect for /twiki/index.html to view web home
  - Rewriting .htaccess.txt to customize for this host


author: Jorge Gallegos <kad@blegh.net> - 0.9.8.3-2
changelog:
  - Added uwsgi_fix_rpath.patch
  - Backported json_loads patch to work with jansson 1.x and 2.x
  - Deleted clean steps since they are not needed in fedora


author: Jorge A Gallegos <kad@blegh.net> - 0.9.9.2-1
changelog:
  - Updated to latest stable version
  - Correctly linking plugin_dir
  - Patches 1 and 2 were addressed upstream


author: Jorge A Gallegos <kad@blegh.net> - 1.0.4-1
changelog:
  - Addressing issues from package review feedback
  - s/python-devel/python2-devel
  - Make the libdir subdir owned by -plugins-common
  - Upgraded to latest stable upstream version


author: Sergey Morozov <sergey.morozov@corp.mail.ru> - 2.0.5.1-1
changelog:
  - Build now inherits "base" buildconf with only python, rack and psgi plugins
  - Removed wiki doc
  - Upgraded to latest stable upstream version


