# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.1.1
changelog:
  - FIXES
  - Fixed an issue to align hp-health status messages.
  - Fixed an issue to stop pagination of IMLs when in script mode.
  - The "hp-snmp-agents"and "hp-health" initialization scripts are enhanced to check for the existence of a support IPMI stack.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant G6 servers. 
  - ASR time-out value can be set from hpasmcli when ASR is enabled. 
  - Updated the installation instructions in hp_mgmgt_install man page. 
  - Removed the script dependency between the hp-health and hp-snmp-agents RPM. To enable just storage agents, customers now in  stall the hp-health and hp-snmp-agents. If the "/etc/init.d/hp-health" file is removed or renamed, the storage agents will   start if configured in the /opt/hp/hp-snmp-agents/cma.conf file. 
  - Init scripts .status. function for hp-snmp-agents & hp-health now differentiates whether an agent exited normally or abnorm  ally. 
  - libcpqci moved to hp-health to simplify dependency handling. and .libcpqci updated to version 2, will now handle hpilo driv  er. 
  - Added Trusted Platform Module (TPM) awareness.

  - FIXES
  - Fixed an issue where   hpasmcli does segmentation fault if we execute the following sequence of commands in hpasmcli on Int  el platforms: show dimm, show temp, show dimm. 
  - Fixed the improper functioning of .repair. option in hpasmcli utility. 
  - Fixed an issue where  hpasmxld/hpasmlited was logging all the messages into syslog with priority .error.. Now it will log e  ach message with its actual priority. 
  - Fixed an issue where IML was not showing new events in hpasmlited + OpenIPMI configuration. 
  - Fixed an issue where the command .service hp-health restart. was showing the twice.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - FIXES
  - Fixed an issue where running multiple instances of .hplog -i' may cause more than 90% CPU utilization. 
  - Fixed an issue where the servers with large amount of memory may ASR during memory initialization. 
  - Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet.


author: HPE Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.5.0
changelog:
  - ENHANCEMENTS

  - FIXES
  - iLO hpasmlited daemon crash after 2 iLO resets loops.
  - hpasmcli command fails to read the embedded NIC status shows as UNKNOWN.
  - Error logs seen in service hp-asrd status.


author: Ver:2.40-13.0
changelog:
  - Please refer to online documentation by searching for the 
  "HP Array Configuration Utility CLI" using the search box on
  http://www.hp.com. Then select the Download software link,
  select your operation system. Under the Enhancements tab is a 
  description of the changes. (Severity: Low)


author: Pawel Krupa <pkrupa@redhat.com> - 0.0.0-3
changelog:
  - Temporary set version statically
  - Fix changelog ordering
  - Comment-out node.d configuration directory


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-4
changelog:
  First draft refactor on package dependencies section
  - Remove freeipmi/nfacct plugin flags. We auto-detect all plugins by decision
  - Start refactor of package dependencies
  - Add missing dependencies, with respect to distro peculiarities
  - Adjust existing dependencies, so that distro-specific package names is applied


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-5
changelog:
  Another pass on cleaning up pre/post installation steps
  - Sync permission and ownership on files and directories


author: Pavlos Emm. Katsoulakis <paul@netdata.cloud> - 0.0.0-7
changelog:
  - Raise the path overrides to the spec file level, not just the configure.
  - Adjust tighter permissions on some folders, based on what we did on our installer
  - Introduce go.d plugin download and install, to include it on the package (Temporarily, to become separate package on next iteration)


author: Robert Duncan <robert@robduncan.co.uk> - 1.9.2-p180-1
changelog:
  - Update prerequisites to include make
  - Update ruby version to 1.9.2-p180
  - Install /usr/share documentation
  - (Hopefully!?) platform agnostic


author: Ian Meyer <ianmmeyer@gmail.com> - 1.9.2-p180-2
changelog:
  - Remove non-existant --sitearchdir and --vedorarchdir from 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/lib64/gfortran/modules}" ; export FFLAGS ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=x86_64-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/var/lib \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info
  - Replace --sitedir --vendordir with simpler --libdir
  - Change /usr/share to /usr/share


author: Ver:3.40-3.0
changelog:
  - Please refer to online documentation by searching for the 
  "Smart Storage Administrator Configuration Utility CLI" using
  the search box on http://www.hpe.com. Then select the Download
  software link, select your operation system. Under the Enhancements
  tab is a description of the changes. (Severity: Low)


